Firing Services

If you have not fired with me before, please fill out the information form below. I do require that you have experience and knowledge in ceramics to fire your work. I will review your submission and if you are eligible for firing, I will contact you with a firing agreement and instructions for dropping off and picking up your work.

By the Shelf Firing
I offer firing "by the shelf" in my Evenheat 2329 electric kiln on a regular schedule that can be found on the calendar at the bottom of the page. The kiln is 7.5 cubic feet with interior dimensions of 23.5" wide and 29" deep. The rates are as follows:

Bisque ^06
per shelf (21" diameter, 6" high) - $18

Glaze ^6
per shelf (21" diameter, 6" high) - $22

I do not offer priority firing for the "by the shelf" firings and will only go by the schedule listed.

By the Kiln Firing
I do offer firing "by the kiln" for those that can fill the kiln by themselves, or need a quicker turnaround. The kiln is 7.5 cubic feet with interior dimensions of 23.5" wide and 29" deep. Those rates are as follows:

Bisque ^06
full kiln - $55
​
Glaze ^6
full kiln - $75


Test Firing
I also have a Skutt 609 that can be used for small pieces or test firings. Prices are for full kiln. The kiln's interior dimensions are 11" wide and 9" deep.

Bisque ^06 - $10
Glaze ^6 - $15

Please reach out to me for availability for full kiln firings.